Wirecast enables you to broadcast media created outside of Wirecast, as well as live camera and live microphone sources.
Topics
Before broadcasting, create a document and configure the Wirecast inputs. Add shots to the document. Add sources to the shots. The document then contains the shots and sources for a particular broadcast.
You keep all the resources for a particular broadcast in a Wirecast document. You can save the audio, video, file, and controller sources, as well as the output settings, for a broadcast in a document file. Wirecast Document files have the file extension, WCST.
To create a new document, do the following:
1.Select File > New.
Wirecast opens a new document.
2.To save the document, select File > Save.
3.Enter a file name for the document, and click Save.
Note: Consider establishing a file-naming method for documents. For example, you could name documents for specific broadcasts, or for specific types of broadcasts.
To add media to a document, do the following:
1.Select File > Import Media.
2.Browse to the media file desired, select it, and click Open.
Wirecast imports the file into the document.
To optimize the user interface for each document, you can configure the Wirecast layout. Wirecast saves the layout settings in the document file.
See The Default Layout.
To configure the Wirecast layout, do the following:
1.Select Layout.
See Layout Menu.
2.Choose a desired option from the menu.
Wirecast configures the layout accordingly, and closes the Layout menu.
3.To select whether Wirecast displays the Preview Area, the Live Program Area, or both, choose the appropriate Mode Selection button.
See Layers.
To change the height of any layer, and the size of the shot icons on the layer, do the following:
1.Click the lower edge of the layer desired.
2.To increase the layer height, drag the lower edge downward. To increase the height, drag it upward.
See the screenshot of the Layers window in the topic Layers.
You can preview media files in the Preview Area.
See Preview Area.
To display the Preview Area, select Layout > Show Live and Preview, or Layout > Show Preview Only.
See Preview Area.
Viewing a Shot in the Preview Area
To view a shot in the Preview Area, click a shot in a layer.
Wirecast displays the shot in the Preview Area.
See The Default Layout, Viewing the Preview Area, and Preview Area.
Magnifying the Preview Scrub-Bar Scale
To change the Preview Area scrub-bar scale, do the following:
1.To display the preview-shuttle magnification slider, click the magnifier (spyglass) button at the bottom of the Preview Area.
2.Drag the preview-shuttle magnification slider to the left to zoom out (increase) the time scale of the preview shuttle, and to the right to zoom in (decrease) the time scale of the preview shuttle.
For example, if you move the slider to the right, the In and Out controls move farther apart, increasing the magnification, so that you can more easily adjust the location of the In and Out controls. This is very helpful when you have long-duration shots. The magnification slider stops sliding when the scrub bar represents the full length of the shot.
Setting Preview Playback Speed
To set the speed of playback in the Preview Area, do the following:
1.Click the speed-control button (1x) at the bottom of the Preview Area.
Wirecast opens the speed drop-down menu.
2.Select a speed from the drop-down menu. Your choices are 1x (normal speed), 2x (double speed), .5x (half speed), and .25x (one-fourth speed).
Wirecast mutes the audio for any speed other than 1x.
You can use keyboard commands to execute most of the menu commands in Wirecast. These keyboard shortcuts are called application shortcuts. You can also execute many Wirecast document commands with keyboard shortcuts you create. These are called document hotkeys.
Note: You can view complete lists of application shortcuts and document hotkeys on the Shortcuts tab of the Preferences dialog.
Finding an Application Shortcut
You can find existing application shortcuts through the Shortcuts tab on the Settings dialog.
To find an application shortcut, do the following:
1.Select File > Preferences > Shortcuts.
2.Select the desired keyboard shortcut set from the Keyboard Shortcut Set drop-down menu.
3.Click the Application Shortcuts tab.
4.(Optional) To filter the shortcuts Wirecast lists, click the All, Customized, or Conflicted sub-tab.
5.To expand a menu item in the list, click the “+” next to the name of the menu item.
6.Do one of the following:
–Scroll down to the desired menu item to find its assigned application shortcut.
–Enter the name of the menu item into the Search field.
Wirecast filters the list of menu items, displaying only those containing your search term.
See also Shortcuts Preferences.
You can find existing hotkeys for controlling documents through the Shortcuts tab on the Settings dialog.
To find a document hotkey, do the following:
1.Select File > Preferences > Shortcuts.
2.Select the desired keyboard shortcut set from the Keyboard Shortcut Set drop-down menu.
3.Click the Document Hotkeys tab.
4.Scroll down to the desired hotkey.
See also Shortcuts Preferences.
You can create and edit shots for your broadcasts before you begin broadcasting.
1.To create a shot, click the “+” in any of the layers.
See Layers in The Default Layout.
Wirecast opens the Add Shot dialog box.
2.Select options for the shot as desired.
See Add Shot Window.
1.To create a shot, click the “+” in any of the layers.
See Layers in The Default Layout.
Wirecast opens the Add Shot dialog box.
2.Select Templates.
3.Select Shot Template, and click the Add button.
Wirecast opens the templates dialog.
4.Select the template desired, and click Add.
See Add Shot Window and Creating a Custom Shot Template.
1.To add media files from a local drive to a shot, click the “+” in any of the layers.
See Layers in The Default Layout.
Wirecast opens the Add Shot dialog box.
2.Click Media Files.
3.To select a media file from a local drive, double-click Browse Disk.... Select a file and click Open.
4.Click Add.
See Add Shot Window.
You can add network sources, such as Zoom feeds, to shots.
1.To add a network source from a local drive to a shot, click the “+” in any of the layers.
See Layers in The Default Layout.
Wirecast opens the Add Shot dialog box.
2.Click Network.
3.Select a network source from the list.
4.Click Add.
See Add Shot Window.
1.To add media files from the Stock Media Library to a shot, click the “+” in any of the layers.
See Layers in The Default Layout.
Wirecast opens the Add Shot dialog box.
2.Click Media Files.
3.Double-click Stock Media Library.
4.The first time you open a Stock Media Library file, Wirecast displays Terms and Conditions. Read the Terms and Conditions, check the I Agree checkbox, and click Proceed.
Wirecast opens the Stock Media Library.
See the screenshot of the Stock Media Library in Stock Media Library.
5.Use Source Type and Left/Right buttons to navigate to a media file, then click Download to include it as a shot.
6.Click Add.
See Add Shot Window.
1.To add media files to a shot, click the “+” in any of the layers.
See Layers in The Default Layout.
Wirecast opens the Add Shot dialog box.
2.Click Video Capture. Select video sources for the shot as desired.
3.Click Add.
See:
Wirecast: How to find the URI to add an IP Camera as a Web Stream source
Wirecast lists any NewTek NDI source on your local network under the Network option in the Add Source menu. To add an NDI source to a shot, do the following:
1.In a layer, click the “+” icon.
Wirecast opens the Add Shot dialog box.
2.Select Network.
3.Select the NDI source from the list of sources in the right-side pane, and click Add.
Wirecast creates a shot for the NDI source selected.
Note: When checked, GPU Decoding for incoming sources will use your GPU to process the incoming NDI source, reducing the processing demand on the CPU.
Select video source, audio source and audio output. You can also make a copy of the URL to send to guests by clicking Copy.
See NDI Devices in the Shot Layer Properties Tab.
See also How to setup a NDI Discovery Server to resolve NDI connectivity issues in Wirecast.
You can use low-latency, secure SRT feeds in your Wirecast productions. Wirecast lists any SRT source on your local network under the Network option in the Add Source menu. To add an SRT source to a shot, do the following:
1.In a layer, click the “+” icon.
Wirecast opens the Add Shot dialog box.
2.Select Network.
3.Select SRT Stream from the list of sources in the right-side pane, and click Add.
Wirecast creates a shot for the SRT source selected, and opens the SRT Stream Properties tab.
4.(Optional) In the SRT Stream Properties tab, modify the SRT stream properties as desired. For example, you can adjust the protocol (SRT Caller or SRT Listener), add the address and pass-phrase if applicable, and enable encryption.
See Setting Up a PTZ Camera Shot.
1.To add media files to a shot, click the “+” in any of the layers.
See Layers in The Default Layout.
Wirecast opens the Add Shot dialog box.
2.Click Audio Capture. Select audio sources for the shot as desired.
3.Click Add.
See Add Shot Window and Adding an Audio Shot.
1.Select multiple sources in the Shot Layers tab of the Shot Editor.
2.Select Edit > Copy.
3.Select Edit > Paste as New Consolidated Shot to create a new shot in the selected layer.
See Edit Menu.
To add a title to a shot, do the following:
1.In a layer, click the Add Shot “+” button.
See Layers in The Default Layout.
2.Select Overlays > Title.
3.To add the title to your document, click the Add button.
See Title.
To add a virtual set to a shot, do the following:
1.In a layer, click the Add Shot
button.
See Layers in The Default Layout.
2.Select Templates > Shot Template.
3.In the Shot Template dialog box, navigate to one of the built-in virtual sets, and select it.
4.Customize the set as desired.
To open a shot in the Shot Editor window, do one of the following:
•In a layer, double-click the shot desired.
•Single-click the shot to select it. Then click the double-arrow
on the left of the default layout to open the Shot Editor window.
See The Default Layout and The Shot Editor Window.
You can add, delete, or rearrange layers in a shot with the controls on the Shot Layers tab of the Shot Editor.
See Shot Layers Tab.
To add, delete, or rearrange layers in a shot, do the following:
1.In the Shot Editor window, select the Shot Layers tab.
2.Select a shot in a layer. Then select Edit > Edit Shot.
3.On the Shot Layers tab, edit the shot in one or more of the following ways, as desired:
•Add a layer by clicking the plus button
.
•Delete a layer by selecting it and clicking the minus button
.
•Reorder the layers by selecting a source and clicking the up-arrow
or down-arrow
to move it.
•To move a layer forward or back, replace a source in a layer with another source, add a layer to a shot, remove a layer from a shot, or display the original location of a media file, click the gear button
.
•Toggle, on or off, the visibility of a video source by clicking the eye button
.
•Toggle, on or off, the visibility of an audio source by clicking the speaker button
.
See Shot Layers Tab.
To resize or rotate a shot, do the following:
1.Click a shot in a layer. Then, click the shot in the Preview Area.
Wirecast places a control frame around the shot in the Preview Area. The control frame includes handles for resizing and rotation.
2.Click and drag any of these handles to resize or rotate your image.
See Preview Area.
You can also snap an image in the Preview Area to various alignments: Snap to Center, Snap to Edge, Snap to Corner, or Snap to an Image. The yellow guidelines appear when the image is ready to snap into place.
See Preview Area.
You can move a selected shot to another layer by selecting Move to Layer from the Edit menu, then selecting the target layer from the drop-down menu. You can also click and drag the shot icon to a different layer.
When shots are created, they are assigned to a specific layer. They exist on that layer until they are moved or deleted. (See Layers.)
To temporarily disable the snap action, hold down the Alt key while moving an image into place (the yellow snap lines will not appear). Additionally, after selecting an image, you can use the arrows keys to nudge it into correct placement.
You can create and broadcast shots containing multiple preselected clips. First, create and edit the playlist shots.
To add a live source to a playlist, click the “+” in one of the layers, and select a live source from the list.
To create a new Playlist, click the “+” in one of the layers, and select Shots.
Select New Playlist Shot. Then click Add.
The playlist shot displays a playlist badge and the playlist duration.
To add clips to an existing playlist, do one of the following:
•Click and drag the desired clip from any layer onto the playlist shot.
•Click and drag the desired shot onto the playlist shot (you must click the bottom part of the shot icon to drag it).
To add clips to an existing playlist shot from the Shots menu, do the following:
1.In a layer, double-click the desired playlist shot.
Wirecast opens the Playlist tab.
2.Select Shots > New Shot, and select the clips desired.
Wirecast adds the selected clips to the playlist.
To edit a shot in a playlist, do one of the following:
•Double-click the shot in the playlist.
•Right-click the shot and select an item from the Shot Menu.
See The Shot Menu.
Note: Do not delete shots from a playlist while the playlist is running.
You can determine how Wirecast plays playlists. To select playlist options, do the following:
1.In the Main Shot List tab in the Layers window, select a playlist shot, and click the button for the Source Properties tab.
See the Source Properties tab on The Shot Editor Window.
Wirecast opens the Playlist Properties tab.
2.In the Playlist Properties tab, set the options for the playlist as desired.
The Change Shot menu for playlist shots has a Modify Duration option. By default, live sources have an infinite duration (since they are not clips). For clips, you must assign a duration time.
To set or change the duration of a playlist shot, do the following:
1.Right-click the shot and select Modify Duration from the Shot Menu.
See The Shot Menu.
Wirecast displays the Shot Duration window.
2.Enter a new duration time value.
3.(Optional) Check Apply to All if you want this duration applied to all items in the playlist.
4.(Optional) Reset the duration to its original value by clicking Reset.
5.Click OK when finished.
To add a live source to a playlist, click the “+” in one of the layers, and select a live source from the list.
Note: Wirecast does not support nested playlists: playlists within playlists).
You can create replay shots that you can broadcast at any time.
To create a Replay shot, do the following:
1.Make sure you have activated Replay.
See Activating Replay.
2.To play a clip, select the clip and click the Go button.
3.Select Replay + ISO > Program Replay > Start.
Wirecast displays the Replay controls.
4.Click the Create Replay Shot button.
Since the default replay duration is set at 30 seconds, Wirecast creates a Replay shot that starts 30 seconds before you clicked Create Replay Shot. Wirecast places the new Replay Shot in Layer 1 and displays the Replay controls next to the transition controls and Go button.
See The Default Layout.
To create a replay shot from a layer, do the following:
1.In a layer, click the plus button
. In the Add Shot dialog box, select Shots > Replay Shot. Click Add.
2.In the Shot Layers tab of the Shot Editor, add additional graphics, titles or other sources to the shot as needed.
3.Select Replay+ISO > Configure, then select Replay Settings. Select the Replay template from the Replay Shot Template drop-down menu, check Program Replay, and click OK.
4.Enable the Replay system by selecting Replay+ ISO > Start All.
Wirecast displays the Replay controls.
5.Click the Create/Update Replay Shot button to create a Replay shot using the template.
See the Create/Update Replay Shot button on the screenshot in Replay Controls.
See Add Shot Window, The Shot Editor Window, Shot Layers Tab, and Replay Layer.
To trim a Replay shot from its start, do the following:
1.Select a Replay shot in a layer.
The Replay shot appears in the Preview Area.
2.Trim the shot by moving the In Point indicator and Out Point indicator to the desired start and end frames.
See In Point and Out Point in Media Files.
3.Play the Replay shot to the frame you want to end the shot.
4.Click the Create Replay Shot button.
Your Replay Shot now contains only the content you wanted.
You can determine what Wirecast does when it is finished playing a live clip. To set what Wirecast does when finished, do the following:
1.Select a shot in the Shot Layers pane.
2.Click the three-dot button to open the Source Properties tab.
See the Source Properties tab on the screenshot of The Shot Editor Window.
3.Select the desired options for the clip on the Source Properties tab.
Wirecast lets you incorporate social-media feeds into your broadcasts. With the Social Comments feature, you can display, in overlays, posts from Facebook or from YouTube Live. Also, you can conduct and display Facebook polls.
The Social Comments feature lets you bring audience comments into your broadcast. You can bring in comments from Facebook Live (Profile, Page, Group), and YouTube Live broadcasts.
Setting up comment display is a two-step process:
1.Authenticate with the platforms from which you want to pull comments.
2.For Facebook and YouTube, begin streaming live to those platforms.
3.Choose a social media title where Wirecast displays the comments.
Once you start streaming, you can moderate incoming comments manually, or set them to rotate on-screen during your broadcast.
See The Comment Moderation Window, Social Media Title, and Moderating Social Media Comments.
To display posts from a Facebook Live or YouTube Live feed in your broadcast, first configure Wirecast for Facebook Live or YouTube Live.
To configure Facebook Live or YouTube Live social comments, do one of the following:
•(Facebook only) Set your Facebook stream to public so that Wirecast can display Facebook comments in the Comment Moderation window.
• Click Output > Output Settings, and set up a streaming destination.
See Adding a Destination and The Output Settings Window.
•Click Social > Comments, and click either the Facebook or the YouTube logo.
Wirecast opens the Output Settings window, where you set up your streaming destination.
See also Configuring Wirecast to Show Facebook User Name and Photo, Moderating Social Media Comments, and Moderating Facebook or YouTube Comments for a Streaming Computer or RTMP Server.
Configuring Wirecast to Show Facebook User Name and Photo
By default, Wirecast displays a generic Facebook User graphic to identify the source of a Facebook Live comment. To enable Wirecast to display the actual Facebook user name and photo, ask the Facebook user to grant permission to Wirecast. Do the following:
1.Make sure Wirecast is configured to show Facebook comments.
See Configuring Facebook Live or YouTube Live Comments.
2.Let your viewers know you want to include their names and photos for their comments. Request their permission to let Wirecast access their names and pictures. Tell them they may grant permission through this website:
https://telestream.net/facebook/permission.htm
3.Tell your users that, to grant permission, they should click the button, Let Wirecast display your Facebook Live comments.
Choosing a Social Media Title for Displaying Comments
To choose a title for displaying social media comments, do the following:
1. Click the “+” in one of the layers to create a new shot.
2.Click Overlays > Social Media Title.
Alternatively, from the Comment Moderation window, click the Create Title Shot button in the lower left.
3.Specify what each of the types of title displays.
4. Add your title shot to one of the layers in your document.
Note: You can adjust the settings for each social media title in the Title Properties panel.
When you start your live stream, Wirecast displays comments from Facebook and YouTube in the Comment Moderation window.
See The Comment Moderation Window.
You can create and display Facebook polls in your broadcast. First, configure Wirecast for Facebook.
Note: Wirecast displays Facebook polls in the Facebook user interface only when a Facebook video is playing, and is fully open.
Note: Wirecast can use only Facebook Polls created within the Wirecast application itself. You can’t import Facebook polls created within the Facebook Live user interface.
To create a Facebook poll, do the following:
1.Select Social > Facebook > Create New Poll.
Wirecast opens a dialog box for specifying the poll options.
2.Enter a question.
3.Select whether there are two, three, or four answers, and enter each answer. Be sure to enter an answer for every option selected.
4.Check the boxes for any of the implementation options desired.
5.Click OK.
Once you’ve created the poll, Wirecast lists the poll in the Social > Facebook menu.
See Facebook.
To select an existing Facebook poll, do the following:
1.Select Social > Facebook.
2.Select a previously-created poll from the drop-down menu.
Note: Wirecast saves Facebook polls, like Wirecast preferences, with the Wirecast application, not with a specific document.
See Facebook.
Editing or Deleting a Facebook Poll
To edit or delete an existing Facebook poll, do the following:
1.Select Social > Facebook.
2.Select a previously-created poll from the drop-down menu.
3.Do one of the following:
•To edit the poll, select Edit.
•To delete the poll, select Delete.
Note: Facebook does not allow you to edit a poll that is being shown, so this option is not enabled while streaming to Facebook and using a poll.
See Facebook.
Showing or Hiding a Poll or Results when Streaming to Facebook
The options Show Poll, Show Results, and Hide are available when streaming to Facebook. Once you’ve activated the poll, you may display a poll or its results at any time while streaming to Facebook. When you start streaming, Wirecast makes the Show Poll option available, but by default, it is not selected.
There is a lag of 5 to 15 seconds between selecting a poll and having it appear in your stream. When Wirecast starts displaying the poll, it adds a check mark to the Show Poll option, and Wirecast enables the Show Results and Hide options.
To show or hide a Facebook poll or Facebook poll results, do one of the following:
•To show a Facebook poll, select Social > Facebook > Show Poll.
•To show the results for the Facebook poll, select Social > Facebook > Show Results.
Note: Showing a Facebook poll closes the poll to further responses.
Note: Facebook does not automatically display polls. The viewer must click on the video to see or vote on a poll.
•To hide the Facebook poll and results, select Social > Facebook > Hide.
Note: You may hide a poll only if it’s the active poll. Showing a different poll, or showing the results for a different poll, hides any other polls being shown. This allows you to show a poll, or show the results of the poll, and then hide it.
Wirecast comes with nine default placeholders, labeled A through I. If you need more, you can create your own. All existing placeholder letters appear in the list of available placeholders. Wirecast displays the current assignment of each placeholder next to the letter.
•To generate a new placeholder, select New Placeholder and click Add.
Wirecast displays the new placeholder shot in the shot editor, and displays its Placeholder [#] in the list of placeholders.
Note: Wirecast saves new placeholders in the open document. These placeholders don’t appear in other documents. You can’t assign media to a placeholder with New Placeholder > Add. You can add an existing placeholder, or a new placeholder, to a shot.
To assign media to a placeholder, do one of the following:
•Select Media > Assign Placeholder. Any placeholders that have been added to shots appear in the Assign Placeholder drop-down menu. Clicking on one of the available placeholders opens the Assign Placeholder dialog box.Select the type of placeholder desired in the left pane, select a source in the right pane, and click Assign. When you assign a source to a placeholder, Wirecast uses that source in every shot in which that placeholder is used.
•In the Shot Layers tab, click on the gear menu of any placeholder and select Assign Placeholder. Wirecast opens a drop-down menu. Select a source for the placeholder.
•Right-click on a placeholder in the Preview Area. Wirecast opens a similar Assign Placeholder drop-down menu where you can select a source to replace your placeholder.
Note: You can assign media that isn’t yet used in the document to a placeholder. However, you can’t assign Rendezvous guests to a placeholder until they’ve joined the broadcast.
Select Media > Reset Placeholder, then select a placeholder to remove any media assignments.
To view the available placeholders, do one of the following:
• In a layer, click the “+” Add Shot button, and select Templates. Wirecast displays a list of available placeholders and their assignments in the Add Shot dialog box.
• Select Media > Assign Placeholder. Wirecast displays a partial list of available placeholders.
You can add a placeholder shot in the same way you add other shots. To add a placeholder shot, do the following:
1.To create a shot, click the “+” in any of the layers.
See Layers in The Default Layout.
Wirecast opens the Add Shot dialog box.
2.Select Templates.
3.Select a placeholder, and click the Add button.
Wirecast adds the placeholder shot to the layer.
To delete a placeholder from a shot, do the following:
1.In a layer, click a shot that contains a placeholder.
Wirecast opens the shot in the Shot Layers tab.
2.Select the placeholder in the Shot Layers tab.
3.Click the delete button (-).
When you confirm, Wirecast deletes the placeholder from the shot.
To configure any shot with a placeholder and save it as a template shot, do the following:
1.On any shot in a layer, click the gear button
. Then, select Save Shot as a Template.
Wirecast displays a Request dialog.
2.Enter a template name and click OK.
Wirecast adds the shot template to the Custom Templates section of the templates dialog.
Wirecast saves custom templates in Global Preferences so that you can access your custom templates across different documents.
Note: Any placeholders in your custom template revert to an unassigned placeholder, even if that placeholder was assigned to a source when you saved the custom template.
See Creating a Shot from a Shot Template.
To delete a custom template, do the following:
1.To open the Templates window, click the “+” in a layer.
Wirecast opens the Add Shot dialog.
2.Select Templates > Shot Template.
Wirecast opens the Shot Template dialog.
3.Select the custom template to delete, then click Delete Template.
Wirecast deletes the template from your Global Preferences. The custom template no longer appears in the Shot Templates window. However, Wirecast doesn’t delete shots in any documents that are based on the deleted shot template.
All
Displays all sources in one list.
Favorites
Displays a list of shots that have been marked as a Favorite by clicking on the star on the right side of each shot in the Add Shot dialog.
Media Files
Creates a Media File shot (video clip or picture). When selected, a navigation widow displays. Navigate to a media file location, select a media file, and click Open.
Shots
Creates a new shot. Options are New Playlist Shot, which creates a new Playlist shot, and New Shots From Clipboard, which creates a new shot from a file that has been copied to the clipboard. This is how you duplicate a shot.
Select a shot and click the Add button.
See Templates.
You can control cameras that allow remote control of pan, tilt, and zoom (PTZ) functions. First, configure Wirecast to support your PTZ cameras.
See Adding an SRT Source to a Shot.
Setting Up PTZOptics Camera with a Dynamic IP Address
PTZOptics cameras ship with a Static IP address set to 192.168.100.88. To communicate with your cameras on your network, you must change this address to one in range of your network.
To set up your PTZOptics camera IP address, follow these steps:
1.To obtain a usable IP address for your camera, ensure you can access the video feed of your camera over HDMI or SDI (not IP). Since you will change the IP address, you must use HDMI or SDI to access the video feed. Connect the HDMI port of the camera to a TV, or if you are already using a capture card with, add the source to your document and queue it up in the Preview Area.
2.To set your Camera to DHCP (Automatic)--making it addressable by your PC--on the camera remote control, enter “# * 4” sequentially. The camera displays a message in the video feed that says “DHCP OPEN.” Then the camera reboots automatically.
Note: If your camera doesn’t display “DHCP OPEN” or restart automatically, contact PTZOptics for assistance, or manually assign the IP address yourself.
3.When Wirecast displays the video feed, on the remote control, enter “# * 4” (sequentially) to view the new DHCP address. The camera now requests a new IP address whenever it is plugged into a new network. This means the IP address can change, which generally isn’t desirable in a live environment.
If you prefer to set a static IP address for a permanent installation, follow these steps:
1.To obtain a usable IP address for your camera, ensure you can access the video feed of your camera over HDMI or SDI (not IP). Since you will change the IP address, you must use HDMI or SDI to access the video feed. Connect the HDMI port of the camera to a TV, or if you are already using a capture card with, add the source to your document and queue it up in the Preview Area.
2.To set your Camera to DHCP (Automatic)--making it addressable by your PC--on the camera remote control, enter “# * 4” sequentially. The camera displays a message in the video feed that says “DHCP OPEN.” Then the camera reboots automatically.
3.Open a web browser, and enter the IP address obtained in the previous steps. You can view that IP address by entering “# * 4” (sequentially) using the remote control.
4.Enter admin for both the username and password.
5.Select Network in the navigation options, located at the top-left part of the web page.
6. Find the DHCP/STATIC setting.
7.Set IP Configuration Type to Fixed IP Address.
8.When Wirecast displays the confirmation dialog window, click Apply, then click OK.
9.Recycle to power on the camera to reboot it.
Note: If you have trouble setting the IP address on your camera, contact PTZOptics for assistance.
1.Get the IP address of your camera.
See Setting Up PTZOptics Camera with a Dynamic IP Address and Setting Up PTZOptics Camera with a Static IP Address
2.To display the PTZ Controller panel, select Window > PTZ Controller.
3.Select the video ingestion method from the Camera menu. This will be an HDMI or SDI capture device, or NDI if your device supports it.
4.Enter the IP address for your camera.
5.Port and VISCA Address are set automatically to the default values for PTZOptics camera. You don’t need to change these.
6.Click the Connection button to the far right of Status. Wirecast displays connected when a connection is made.
To set up a Wirecast shot using a camera setup, do the following:
1.To display the PTZ Controller panel, select Window > PTZ Controller.
2.Select D-Pad from the Pan/Tilt menu and move the camera to a desired position. Pan the camera by clicking the left and right arrows, and tilt the camera by clicking the up and down arrows.
3.Enter a preset number (0 to 255) and click the Save button to save this camera position.
4.To create a camera shot, click a “+” in one of the Wirecast layers.
Wirecast opens the Add Shot dialog box.
5.Select Video Capture, select your camera from the device pane, and click the Add button.
Wirecast places your PTZ camera shot in the layer.
6.To open the Shot Editor, double-click your camera shot. Click the Shot Layer Properties tab.
7.Click the PTZ triangle to display the PTZ controls. Check the Preset check box, enter a preset number and click the Go arrow.
You can now move your camera by changing shots.
To open the PTZ Controller panel, select Window > PTZ Controller.
Once you have configured a shot layer with a PTZ preset, sending that shot to preview recalls the preset for the camera. If multiple shots share the same video source with different PTZ presets configured, the shot which is currently live takes precedence over subsequent PTZ preset recall actions, until you drop the shot from the live feed.
To enable preset recall, do the following:
1.In the Shot Editor, select the Shot Layer Properties tab. Click the PTZ triangle towards the bottom of Shot Layer Properties.
2.Check the Enable box. To select a preset, enter a preset number or click the up or down arrow buttons. Click the Go button to cause the associated PTZ camera to go live with the recalled preset.
When you enable Preset, clicking Show PTZ Controller opens the PTZ Controller panel.
See Shot Layers Properties Tab and The PTZ Controller Panel.
Rendezvous provides an easy way to organize a video conference with up to two guests in Wirecast Studio, and up to seven guests in Wirecast Pro. You can bring in live video feeds from a computer or smart device running a supported web browser, or from iOS devices running the Wirecast Go app.
To create a Rendezvous session, do the following:
1.To open the Create Rendezvous Session dialog, do one of the following:
–In a layer, click the Add Shot (+) icon. When Wirecast opens the Add Shot dialogue, select Network > Create Rendezvous Session.
–Select Window > Rendezvous Dashboard. Click the Start Session button.
Wirecast opens the Create Rendezvous Session dialogue.
2.In the Create Rendezvous Session window, optionally select Enable chat for session, Share chat history, or both. Then click Create Session.
The Enable chat for session option enables a chat dialog between you and your guests.
If you select Share chat history with new session guests, guests that arrive at any time in the session see the full chat history. If you don't select this option, new guests see only chat messages that occur after they’ve joined the session.
3.In the Created Session window click the Click to Copy button to copy the Rendezvous URL to the clipboard. Send this URL to the guests that you want to invite to the broadcast.
4.When finished, click OK.
Wirecast opens the Rendezvous Dashboard. If you enabled Rendezvous Chat, Wirecast displays the Rendezvous Dashboard with the Rendezvous Chat panel on the right. You can open and close the Rendezvous Chat panel by clicking on the “>>” button to the left of the Rendezvous Chat panel.
Note: You can also show the live output in the Rendezvous display (instead of your local camera). To do this, click the camera button and select Live Output from [document title]. You can add live output audio by clicking the mic button.
Note: From the Rendezvous Dashboard you can mute audio or hide the camera of your local sources, or the sources of those who have joined. To do this, click the camera or mic button of the source to mute. You can disconnect at any time by clicking the Disconnect button.
See also Rendezvous Essentials.
To start a new session, do the following:
1.Click Window > Rendezvous Dashboard > Start Session.
2.Copy and email the session URL to all potential guests.
To join a Rendezvous session on a remote computer or smart device, do the following:
1.To initiate a connection with Wirecast, paste the URL you received in the Rendezvous invitation email into a browser. Press Enter.
The browser opens a Rendezvous guest window.
See The Rendezvous Guest Window.
Note: The only browsers supported by Wirecast for joining a Rendezvous session are Chrome, Safari, and Firefox.
2.(Optional) To open live chat, click the live chat button.
3.(Optional) Turn off the camera by clicking the camera button.
4.(Optional) Mute the mic by clicking the microphone
button.
5.(Optional) To share a screen, click the share screen
button.
If you select Share Screen, Wirecast opens the Choose what to share dialog.
Select the screen you want to share and click Share.
6.In the Rendezvous window, click the settings
button.
Wirecast opens the Microphone-Camera-Options dialog.
7.In the Camera-Microphone-Options dialog, select a microphone, camera, and options.
8.Enter an identification in the Your name field and click Join.
Note: Wirecast Go, running on iOS devices, can join a Rendezvous session by opening the URL. Android devices can join a session by opening a Session URL (sent to them) in the Chrome browser.
The Rendezvous window displays a Waiting to join message until the Wirecast host has added you as a guest.
Only Rendezvous guests can turn on Music Mode. This greatly improves the audio quality for musical instruments played over Rendezvous.
Rendezvous guests can turn on Music Mode in the Rendezvous web app. This does the following:
•Changes the audio channel from the default monaural to stereo
•Increases the audio bit-rate from the default 32kbps to 256kbps, 128kbps for each stereo track
Note: Wirecast Music Mode improves audio quality only for Rendezvous guests sending audio to Wirecast. To conserve bandwidth, Wirecast doesn’t send the higher quality audio to other guests in a session.
• Disables audio processing (echo cancellation and noise reduction)
Note: Disabling audio processing for speech through normal microphones can result in poor quality audio. Disable audio processing only for music.
To open the Advanced Rendezvous Audio Mixer, do the following:
1.Select Window > Rendezvous Audio Mixer.
Wirecast opens the Advanced Rendezvous Audio Mixer.
When a guest is waiting to join the Rendezvous session, Wirecast displays a guest icon in both the Wirecast default layout and in the Rendezvous Dashboard. To add a guest to a Rendezvous session, do the following:
1.In the Rendezvous Dashboard, click the guest icon and select a guest to add to the session.
1.In a layer, click the Add Shot (+) icon.
2.In the Add Shot dialog, select Network.
3.Under Rendezvous Session, select the name of the guest to add.
Wirecast displays your new Rendezvous shot on the shot layer from which it was selected.
4.Select the shot to display it in the Preview Area where you can place it and size it as needed.
There are times in a live interview when you need to communicate privately with your guests. That is the purpose of the Rendezvous Chat feature in Wirecast.
Wirecast displays a panel on the right side of the Rendezvous Dashboard that, when clicked, slides out to reveal the Rendezvous Live Chat panel.
You receive a notification when a guest types a message, even if you have the Live Chat panel closed or if the Rendezvous Dashboard is not in focus.
Host and guests can type into the message window to communicate. Wirecast doesn’t display this chat panel on the live broadcast, so you can type private messages.
Guests’ names appear above messages they send. If you have several guests, each has a chat bubble window with a unique color, for easy identification.
As the host, you can select Clear Chat at the top right corner of your Live Chat panel. This clears all the messages from the Live Chat panels of you and the guests.
Guests connecting through a browser see the Live Chat panel. They can close their Live Chat panels by clicking on the X in the top of the panel.
If a message arrives for guests with the Live Chat panel closed, Rendezvous displays a green dot on the chat icon. Guests click this to open the chat panel.
If guests disconnect and reconnect to the same session, they still see the chat history, if chat history is enabled.
As host, disconnecting your session forces guests to disconnect, and deletes the chat history.
See Creating a Rendezvous Session and Wirecast: Rendezvous Chat Guide.
To reconnect to the previous session, in the Rendezvous Dashboard, click Reconnect to previous session.
Wirecast restores all settings from the previous session, so long as the remote browsers are still open. If a guest has closed a remote browser, the guest can reconnect using the URL for the previous session.
Rendezvous guests can share their screens and cameras during a broadcast.
Note: You, as guest, might need to enable security or privacy permissions in your browser to allow screen sharing.
Note: Only one person can share screen and camera at any one time. However, multiple people at the same time can share screens with their cameras disabled.
To share your desktop, camera, or both as a Rendezvous guest, do the following:
1.Select Window > Rendezvous Dashboard.
Wirecast opens the Rendezvous Dashboard with a Share Screen button in the top-right corner. The camera-share and screen-share buttons indicate whether camera- or screen-sharing are active.
2.Click the Share Screen button.
Wirecast opens a drop-down menu.
3.Select one of the following options, as desired:
–Share screen & camera
If no-one else is sharing screen and camera, Wirecast asks which screen or window to share. Choose one.
If you, as guest, choose Share screen & camera, Wirecast displays only the Share Screen button for the Wirecast host.
When you, as guest, select Share screen & camera, the host sees two separate feeds in the Rendezvous Dashboard: one for the camera and one for the shared screen. The Wirecast host then can add one or both of these feeds, as separate shots, into the broadcast. Alternatively, the host can display the guest camera and the guest screen picture-in-picture.
–Share screen (disable camera)
When you, as guest, select Share screen (disable camera), the Wirecast host sees your shared guest screen.
Note: If a second guest selects Share screen & camera while a guest already is sharing both, Wirecast notifies the second guest that only one guest can share both screen and camera at a time. Wirecast offers the second guest the Share screen (disable camera) option.
4.(Optional) To stop sharing, you, as guest, can either click the Share Screen button at the top of the Rendezvous Dashboard, or click the Stop Sharing button displayed as a notification at the bottom of the screen.
To close your session, in the Rendezvous Dashboard, click Stop Session.
When you disconnect from a Rendezvous session, Wirecast removes your camera from the guests’ browsers, and removes the guests’ cameras from your local session window.
You can use Zoom feeds in your Wirecast productions.
To join a Zoom session, do the following:
1.Click Zoom > Join Zoom Meeting.
Wirecast opens the Join Zoom Meeting dialog.
2.Do one of the following:
•Click Login.
Wirecast opens your default browser to the Zoom Meeting sign-in page.
a.Sign in to your Zoom account via the Zoom Meeting sign-in page.
Wirecast closes the Authentication initiated with Zoom Meeting dialog.
•Select Invite Link, enter the URL into the Link field, click Join, and enter the Zoom user and password information.
•Select Meeting Info, enter the Meeting ID and Passcode, click Join, and enter the Zoom user and password information.
See Zoom.
To add a Zoom shot, do the following:
1.Join a Zoom session.
2.Add a Zoom shot from the Network sources listed in the Add Shot dialog.
See Adding a Network Source to a Shot.
3.Ask the host of the Zoom meeting to allow Wirecast to record the Zoom meeting.
4.Click Zoom > Join Zoom Meeting.
Wirecast opens the Join Zoom Meeting. dialog.
5.Do one of the following:
–Click Login.
–Select Invite Link, and enter the URL into the Link field
–Select Meeting Info and enter the Meeting ID and Passcode.
6.Click Join.
7.Enter the Zoom user and password information.
8.(Optional) If you want to display the Zoom feed at a higher resolution than usual, select HD under Camera in Video settings.
9.In a layer, select a Zoom shot.
10.Select the Source Properties tab.
Wirecast displays properties for the Zoom shot.
11.(Optional) Select the desired resolution from the Preferred Resolution drop-down menu.
There are three transition buttons: the Transition button, the Transition Controls button, and the Go button. You can configure the Transition button and the Transition Controls button.
See Transition Buttons.
To set the transition speed, select Switch > Transition Speed. Choose one of the five settings: Slowest, Slow, Normal, Faster, and Fastest.
To assign a type of transition to a transition button, do the following:
1.Click the down-arrow on the right side of the transition button.
2.From the drop-down menu, select a new transition to assign to that button.
See Final Mix Audio Panel, and Selecting and Customizing Encoder Presets.
Stinger transitions are custom transitions that employ alpha-channel transparent backgrounds. These transitions typically are created using applications such as Adobe After Effects, Apple Motion or Telestream ScreenFlow.
To import a stinger transition, do the following:
1.Select Switch > Manage Stinger Transitions.
Wirecast displays the Stinger Transition Manager.
2.To import a transition file, click the plus button
, navigate to the desired stinger transition file, and select it.
Wirecast imports the stinger transition file, and adds it to the list of transitions available through the Transition Control button.
Note: Stinger transitions are stored in Wirecast preferences with the paths to media files. This allows the you to re-use stinger transitions in other Wirecast documents. When Wirecast can’t find a media file associated with a stinger transition, Wirecast removes the transition from the transition list. Also, Wirecast highlights the file name in red in the Stinger Transition Manager.
See The Default Layout and Manage Stinger Transitions.
To execute a stinger transition, do the following:
1.To execute a stinger transition, click and drag the Transition Control button to open the drop-down menu.
2.Select the stinger transition.
3.To set the location where the shot will change from A to B, slide the scrubber to a location in the transition, then click the A/B button.
4.Click the Go button to execute the stinger transition.
See The Default Layout, Importing Stinger Transitions, and Manage Stinger Transitions.
To delete a stinger transition, do the following:
1.Select Switch > Manage Stinger Transitions.
Wirecast displays the Stinger Transition Manager.
2.To delete a transition, select it and click the minus (-) button.
3.Click Close to exit the Stinger Transition Manager.
See Manage Stinger Transitions.
Wirecast supports a wide variety of still images types, for example TIFF, GIF, JPEG, and PNG. Some of these formats offer control of opacity, or transparency, by way of an alpha channel. Wirecast works seamlessly with these formats. TIFF, GIF, JPEG, and PNG are the preferred formats for graphics which have transparency.
GIF files offer transparency but not a true alpha channel. You can define part of a GIF image as completely transparent, but not partially transparent. Some GIF images use transparency for much of the image. However, you can’t use transparency near the edges of the visible data in a GIF file. A GIF file that was created on a white background with transparency at the edges might show the white background at the edges in place of the transparency.
Tip: Avoid using GIFs with areas of transparency. When possible, use the image, without transparency, from which the GIF was generated. To add transparency to the image, save it in TIFF, GIF, JPEG, or PNG format; then define the transparency settings of the alpha channel.
Wirecast supports media on a variety of platforms such as AVFoundation, a variety of file types such as MOV and AVI, and a variety of codecs such as AVC or H.264. Shown below is a list of file types and codecs that Wirecast supports.
Video Codec | MOV | MP3 | MPEG-4 | WAV | AIFF | ASF | WEBM |
AVC | NO | NO | NO | NO | |||
H264 | NO | NO | NO | NO | |||
DVC25 | NO | NO | NO | NO | NO | NO | |
DVCPRO50 | NO | NO | NO | NO | NO | NO | |
DVCPRO100 | NO | NO | NO | NO | NO | NO | |
MJPEG | NO | NO | NO | NO | NO | NO | |
ProRes | NO | NO | NO | NO | NO | NO | |
QuickTime Animation | YES | NO | NO | NO | NO | NO | |
VP8 | NO | NO | NO | NO | NO | NO | |
VP9 | NO | NO | NO | NO | NO | NO | |
Windows Media | NO | NO | NO | NO | NO | NO | |
Audio Codec | |||||||
AAC | NO | NO | NO | NO | NO | ||
MP3 | NO | NO | NO | NO | NO | ||
Opus | NO | NO | NO | NO | NO | NO | |
PCM | NO | NO | NO | NO | |||
Vorbis | NO | NO | NO | NO | NO | NO | |
Windows Media | NO | NO | NO | NO | NO |
Wirecast stores paths to your media in the Wirecast document. If you move the media files for a document, use Asset Manager to update the document paths to the new media locations.
Tip: Keep the document WCST file in the same folder where you keep media files for the document. When you need to move the files to a new location, move this whole folder. When you open the document in the new location, Wirecast finds the associated media automatically.
To update paths to media locations, do the following:
1.Select Media > Show Asset Manager.
2.Select the path to a media file you want to change.
3.(Optional) Some media sources, such as cameras, enable you to set the aspect ratio by displaying a Device Aspect Ratio menu. You can select an aspect ratio from this menu.
4.Select the desired media file from the Assign To menu; or click Browse, locate the desired media file, and then select the desired media file.
Note: When Remote Desktop Presenter (RDP) is selected as the media file, you can enter the IP address for the RDP. This enables you to build a Wirecast presentation with place-holders. You can reconfigure the placeholders later for a new source Remote Desktop Presenter.
5.Click Apply to save the new path to the media file, then close the Asset Manager.
Note: You can select a path from the list and click Delete to remove it. Also, you can click Delete All to clear the list.